The electron measures instrument spectrum analyzer to hold Lord of spectrum analyzer R&S and receiver of hand-held of PR100 of the Ci that use wattt

R%26amp;S 羅德與施瓦茨PR100 掌上型

廠商名稱：德國羅德與施瓦茨Rohde%26amp;Schwarz R%26amp;S

Ergonomic and rugged design for portableuse Detectio Detection of unknown signals Frequency scan and memory scan Location of emissions using theR%26amp;S^%26reg; HE300 portable directionalantenna Reliable location of sources ofinterference Demodulation and audio monitoring ofemissions Signal storage in instrument andexternally Signal demodulation at up to 500 kHzbandwidth 15 IF filters from 150 Hz to 500kHz RF spectrum with user-definable frequencyrange IF spectrum with continuous display range from 10kHz to 10 MHz Realtime bandwidth of 10 MHz Spectrum and waterfall display Output of complex baseband data 6%26quot; VGA color display LAN interface (SCPI) for remote control andoutput of measurement data and I/Q data

Specificationsin Brief

RF section
Frequencyrange	9 kHz to 7.5GHz
Inputimpedance	50 ＆#8486;
VSWR	%26le;3:1
Inputlevel	typ. 0dBm
Inputattenuation	typ. 10 dB(manually switchable)
Preselection
9 kHz to 30MHz	30 MHz lowpassfilter
20 MHz to 1.5GHz	tuned bandpassfilters
1.5 GHz to 7.5GHz	twohighpass/lowpass filter combinations
Noisefigure	(preamplifierswitched on)
9 kHz to 30MHz	typ. 16dB
30 MHz to 1.5GHz	typ. 14dB
1.5 GHz to 3.5GHz	typ. 14dB
3.5 GHz to 7.5GHz	typ. 18dB
IP3(input)	(preamplifierswitched off, test signal offset %26ge;1 MHz)
9 kHz to 30MHz	typ. +20dBm
30 MHz to 1.5GHz	typ. +12dBm
1.5 GHz to 3.5GHz	typ. +18dBm
3.5 GHz to 7.5GHz	typ. +18dBm
Phasenoise	typ. 90 dBc/Hz(＆#8710;f = 10 kHz, fc = 500 MHz)
IF section
IF demodulationbandwidth	15 filters(specification of 3 dB bandwidth)
	150 Hz, 300 Hz,600 Hz, 1.5 kHz, 2.4 kHz, 6 kHz, 9 kHz, 15 kHz, 30 kHz, 50 kHz, 120kHz, 150 kHz, 200 kHz, 300 kHz, 500 kHz
IFpanorama	FFT, internal(2048 points), max. 20 pictures/s
Displayrange	10 kHz to10 MHz
Control
Squelch	%26ndash;30 dB%26micro;V to 130dB%26micro;V (in 1 dB steps)
Gaincontrol	AGC,MGC
Frequencycontrol	AFC
	automaticretuning of signals of unstable frequency
	%26plusmn;%26frac12; IF bandwidth(150 Hz to 500 kHz)
Signal processing
Demodulationmodes	AM, FM, PULSE,I/Q (all IF bandwidths), USB, LSB, CW, ISB (only IF bandwidths %26le;15kHz)
Scan
Frequencyscan
Start/stopfrequency	user-selectable
Stepwidth	user-selectable
Panoramascan
Start/stopfrequency	user-selectable
Stepwidth	125 Hz, 250 Hz,500 Hz, 625 Hz, 1.25 kHz, 2.5 kHz, 3.125 kHz, 6.25 kHz, 12.5 kHz,25 kHz, 50 kHz, 100 kHz
Scanspeed	max. 200 FFTsper second
Memoryscan
Memorylocations	1024 channels,user-programmable
Measurement accuracy anddisplays
Frequencyresolution	1Hz
Frequencyaccuracy
Versusspecified temperature range	%26le;1ppm
Versusinstrument aging	%26le;1ppm/year
Signallevel	%26ndash;137 dBm to 0dBm
	%26ndash;30 dB%26micro;V to 107dB%26micro;V
	0.1 dBresolution
Displayerror	max. %26plusmn;3 dB /typ. %26plusmn;1.5 dB
Levelindication modes	AVG, FAST,PEAK, RMS
Offset	up to %26plusmn;%26frac12; IFbandwidth (150 Hz to 500 kHz)
	1 Hzresolution
ADC	14bit
Interfaces
Antennainput
9 kHz to 7.5GHz	N female /50 ＆#8486;
Max. level(nondestructive)	+20 dBm / 0 VDC
Referenceinput
10MHz	BNC female /50 ＆#8486;
Max. level(nondestructive)	0 dBm to +10dBm / 0 V DC
IFoutput
21.4MHz	BNC female /50 ＆#8486;
	uncontrolled
I/Qoutput	LAN (bandwidth%26le;500 kHz)
Video output,digital	LAN (bandwidth%26le;500 kHz)
Audio output,digital	LAN (bandwidth%26le;12.5 kHz)
Audio output,analog	10...300 Hz to12.5 kHz
	dependent on IFfilter and modulation
	stereo jack /100 ＆#8486;
	0 V to %26ge;2V
Data andcontrol interfaces	LAN (Ethernet10/100BaseT)
	USB 2.0 (toread out the SD card)
Power supply
AC (withexternal power supply)	100 V AC to 120V AC
	200 V AC to 240V AC
	50 Hz / 60Hz
DC	15 VDC
Battery	Li-Ion, 6cells
Mechanical data
Dimensions(height x width x depth)	320mm x 192 mm x 62mm
Weight	typ. 3.5kg
Environmental data
Operatingtemperature range	0%26deg;C to +50%26deg;C
Permissibletemperature range	%26ndash;10 %26deg;C to +50%26deg;C
Storagetemperature range	%26ndash;40 %26deg;C to +70%26deg;C



如果閣下需要瞭解該設備詳細情況，請致電0755-83610849聯繫我們的銷售工程師，或發送電子郵件到lscaiyi@163.com索取產品規格書。

>

設備保修與備件更換條件

自用戶購買之日本公司所有新產品均按照原廠質保條例提供3包服務；二手儀器提供7天退還和180天免費質保。

免除免費保修義務

本公司的產品實行保修年限之內的有限保修。屬於下列情況的設備（包括部件）故障或損壞，不在有限保修之列（儘管產品在保修期之內），本公司不承擔免費保修義務：
設備、部件已經超出了保修期；
客戶未按照說明書要求，錯誤安裝，保管及使用而造成的設備（包括部件）故障或损坏；
由非 本公司授权机构、人员拆卸而造成的设备（包括部件）故障或损坏；
因意外因素或者人为原因（包括如操作失误、划伤、搬运、磕碰、输入不合适的电压和电流等）导致的设备（包括部件）故障或损坏；
因自然灾害等不可抗力（如地震、火灾等）原因造成的产品故障或损坏；


 

R&SLord and ShiwaciPR100 Hand-held receiver

Firm name: German collect heart and Rohde&Schwarz R&S of the Ci that use watt

Ergonomic And Rugged Design For Portableuse Detection Of Unknown Signals Frequency Scan And Memory Scan Location Of Emissions Using TheR&S^® HE300 Portable Directionalantenna Reliable Location Of Sources Ofinterference Demodulation And Audio Monitoring Ofemissions Signal Storage In Instrument Andexternally Signal Demodulation At Up To 500 KHzbandwidth 15 IF Filters From 150 Hz To 500kHz

Specificationsin Brief RF Section   Frequencyrange 9 KHz To 7.5GHz Inputimpedance #8486; of 50 ＆ VSWR ≤3:1 Inputlevel Typ. 0dBm Inputattenuation Typ.  10 DB(manually Switchable) Preselection   9 KHz To 30MHz 30MHz Lowpassfilter 20MHz To 1.5GHz Tuned Bandpassfilters 1.5GHz To 7.5GHz Twohighpass/lowpass Filter Combinations Noisefigure (Preamplifierswitched On) 9 KHz To 30MHz Typ. 16dB 30MHz To 1.5GHz Typ. 14dB 1.5GHz To 3.5GHz Typ. 14dB 3.5GHz To 7.5GHz Typ. 18dB IP3(input) (Preamplifierswitched Off, test Signal Offset ≥1 MHz) 9 KHz To 30MHz Typ. + 20dBm 30MHz To 1.5GHz Typ. + 12dBm 1.5GHz To 3.5GHz Typ. + 18dBm 3.5GHz To 7.5GHz Typ. + 18dBm Phasenoise Typ. #8710;f = 10 KHz of 90 DBc/Hz(＆ , fc = 500 MHz) IF Section   IF Demodulationbandwidth 15 Filters(specification Of 3 DB Bandwidth)   150Hz, 300 Hz, 600 Hz, 1.5 KHz, 2.4 KHz, 6 KHz, 9 KHz, 15 KHz, 30 KHz, 50 KHz, 120kHz, 150 KHz, 200 KHz, 300 KHz, 500 KHz IFpanorama FFT, internal(2048 Points) , max. 20 Pictures/s Displayrange 10 KHz To10 MHz Control   Squelch –30 DBµV To 130dBµV (in 1 DB Steps) Gaincontrol AGC, MGC Frequencycontrol AFC   Automaticretuning Of Signals Of Unstable Frequency   ±½ IF Bandwidth(150 Hz To 500 KHz) Signal Processing   Demodulationmodes AM, FM, PULSE, i/Q (all IF Bandwidths) , USB, LSB, CW, ISB (only IF Bandwidths ≤15kHz) Scan   Frequencyscan   Start/stopfrequency User-selectable Stepwidth User-selectable Panoramascan   Start/stopfrequency User-selectable Stepwidth 125Hz, 250 Hz, 500 Hz, 625 Hz, 1.25 KHz, 2.5 KHz, 3.125 KHz, 6.25 KHz, 12.5 KHz, 25 KHz, 50 KHz, 100 KHz Scanspeed Max. 200 FFTsper Second Memoryscan   Memorylocations 1024 Channels, user-programmable Measurement Accuracy Anddisplays   Frequencyresolution 1Hz Frequencyaccuracy   Versusspecified Temperature Range ≤1ppm Versusinstrument Aging ≤1ppm/year Signallevel –137 DBm To 0dBm   –30 DBµV To 107dBµV   0.1 DBresolution Displayerror Max. ±3 DB /typ. ±1.5 DB Levelindication Modes AVG, FAST, PEAK, RMS Offset Up To ±½ IFbandwidth (150 Hz To 500 KHz)   1Hzresolution ADC 14bit Interfaces   Antennainput   9 KHz To 7.5GHz #8486; of ＆ of N Female /50 Max. Level(nondestructive) + 20 DBm / 0 VDC Referenceinput   10MHz #8486; of ＆ of BNC Female /50 Max. Level(nondestructive) 0 DBm To +10dBm / 0 V DC IFoutput   21.4MHz #8486; of ＆ of BNC Female /50   Uncontrolled I/Qoutput LAN (bandwidth≤500 KHz) Video Output, digital LAN (bandwidth≤500 KHz) Audio Output, digital LAN (bandwidth≤12.5 KHz) Audio Output, analog 10...300Hz To12.5 KHz   Dependent On IFfilter And Modulation   #8486; of ＆ of Stereo Jack /100   0V To ≥2V Data Andcontrol Interfaces LAN (Ethernet10/100BaseT)   USB 2.0 (toread Out The SD Card) Power Supply   AC (withexternal Power Supply) 100V AC To 120V AC   200V AC To 240V AC   50Hz / 60Hz DC 15VDC Battery Li-Ion, 6cells Mechanical Data   Dimensions(height X Width X Depth) 320mm X 192 Mm X 62mm Weight Typ. 3.5kg Environmental Data   Operatingtemperature Range 0°C To +50°C Permissibletemperature Range –10 °C To +50°C Storagetemperature Range –40 °C To +70°C



If Your Exllency needs to know this equipment detailed circumstance, call 0755-83610849 to contact our sale engineer please, or send email to ask for product standards book to Lscaiyi@163.com.
>